Wheels
SSR Competition Type C
16″
6.5J
ET32
Toyo R888
195/50
| Rims brand | SSR |
| Rims model | Competition Type C |
| Diameter | 16″ |
| Wheel width | 6.5J |
| Tyre brand | Toyo R888 |
| Tyres | 195/50 |
| Offset | 32 |
| Rims color | Gray/Silver |
SSR Competition Type C
17″
7.5J
ET37
Toyo R888
225/45
| Rims brand | SSR |
| Rims model | Competition Type C |
| Diameter | 17″ |
| Wheel width | 7.5J |
| Tyre brand | Toyo R888 |
| Tyres | 225/45 |
| Offset | 37 |
| Rims color | Gray/Silver |
Engine: Yamaha 2ZZ-GE 1.8L I4
Horsepower: 235 whp
Torque: 165 lb-ft
SOCIAL
Facebook: Clint Yesui
ENGINE
- Eaton MP62 supercharger
- GReddy (67.7-mm supercharger pulley, supercharger intake throttle tube)
- Katana 2 intake manifold
- RC Engineering 550cc injectors
- NGK IX iridium spark plugs
- BOE custom tune
- Custom 1-of-1 polished Saikou Michi dual oil catch cans
- Fumoto F-103N oil drain valve
- Dual oil cooler setup
- TRD 170 thermostat
- Custom hand polished Moroso coolant reservoir
- BOE Evap canister relocation bracket
EXHAUST
- Larini Sports exhaust
- DD Performance ported headers
- Custom de-cat pipe
- Bosch 4.9 LSU wideband sensor w/ weld-in bung
DRIVETRAIN
- ACT HD clutch
- Fidanza lightweight flywheel
WHEELS/TIRES/BRAKES
- Wilwood DynaPro four-piston BBK
- Sector 111 308-mm slotted and drilled one-piece front rotors
- Dual caliper Lotus AP Racing rear setup
- EBC Racing slotted and dimpled rear rotors
- StopTech stainless brake lines
- ATE Type 200 brake fluid
- BOE rear radial caliper mounts
- CarboTech XP-12 front brake pads
- Custom (hub-centric rings, Lotus center caps, Lotus tire Schrader valve caps)
CHASSIS/SUSPENSION
- BC Racing BR series coilovers
EXTERIOR
- GRP (custom front splitter, license plate mount, carbon fiber side scoops, gold hardware, carbon fiber headlights w/ dual halo rings, LED halo tail lights)
- Trueleo side skirts
- Difflow 5 Element rear diffuser
- Custom engine lid mesh
- Custom 1-of-1 Carbign Craft carbon fiber license plate backing
- Xtreme Vision XV-1081CC infrared LED backup camera
- Elise Supercharged decal
- Stuttgart twin stripes
- Doorsill accent stripe
INTERIOR
- AEM (single gauge pod, UEGO AFR gauge)
- Gauge cluster needles dyed red
- Custom 1-of-1 full carbon fiber V1R seats
- Schroth Racing ASM Profi II 4/5-point harnesses
- Transforged Racing custom integrated key and fob signed by Elisa Artioli
- Elise Parts roll bar
- Suede wrapped (center console, rear center console)
- GRP carbon fiber (steering wheel, dashboard, binnacle, instrument cluster, steering column surround, climate control surround, interior switch panel, center radio trim, dashboard end caps, vents, airbag cover panel, door sills, door panels, door pulls)
AUDIO/MOBILE ELECTRONICS
- Pioneer AVH P5200 DVD head unit
- Rockford Fosgate (R500X1D sub amplifier, R2 Ultra shallow 10-inch subwoofer, Punch speakers, Punch level controller)
- Xpress digital 2.0 Farad capacitor
- Valentine One radar detector
SPONSORS
- Greg’s Race Parts, Difflow Diffusers
Does it fit wheels SSR Competition Type C 16″ 6.5J ET32 195/50 17″ 7.5J ET37 225/45 on Lotus Elise Series 2 ?
Yes, it fit. In current example this car with rims SSR
Competition Type C at the same parameters.
Look at our stance gallery and do conclusions. Ask community throught commentaries if you have more questions.
Rims SSR Competition Type C
Other Cars Lotus Elise Series 2
About company SSR
SSR Wheels is a Japanese-based wheel manufacturer that was founded in 1971. The company produces high-quality, lightweight wheels that are suitable for a variety of applications, including racing, drifting, and street use. SSR offers a broad range of wheel styles, from classic mesh designs to modern split-spoke designs, and a variety of finishes to suit any taste. Some of the popular wheel models from SSR include the GTV, Professor SP3, and Formula Mesh wheels.
Updated: 2023-02-27
Nicedayz is looking for editors to the team
Do you like beautiful cars and rims? Welcome!